Est-ce que vous vous souciez encore de réussir le test Microsoft 70-506? Est-ce que vous attendez plus le guide de formation plus nouveaux? Le guide de formation vient de lancer par Pass4Test peut vous donner la solution. Vous pouvez télécharger la partie de guide gratuite pour prendre un essai, et vous allez découvrir que le test n'est pas aussi dur que l'imaginer. Pass4Test vous permet à réussir 100% le test. Votre argent sera tout rendu si vous échouez le test.
Aujoud'hui, dans cette indutrie IT de plus en plus concurrentiel, le Certificat de Microsoft 70-506 peut bien prouver que vous avez une bonne concurrence et une space professionnelle plus grande à atteindre. Dans le site Pass4Test, vous pouvez trouver un outil de se former très pratique. Nos IT experts vous offrent les Q&As précises et détaillées pour faciliter votre cours de préparer le test Microsoft 70-506 qui vous amenera le succès du test Microsoft 70-506, au lieu de traivailler avec peine et sans résultat.
Généralement, les experts n'arrêtent pas de rechercher les Q&As plus proches que test Certification. Les documentations offertes par les experts de Pass4Test peuvent vous aider à passer le test Certification. Les réponses de nos Q&As ont une précision 100%. C'est facile à obtenir le Certificat de Microsoft après d'utiliser la Q&A de Pass4Test. Vous aurez une space plus grande dans l'industrie IT.
Pass4Test est un site à offrir particulièrement la Q&A Microsoft 70-506, vous pouvez non seulement aprrendre plus de connaissances professionnelles, et encore obtenir le Passport de Certification Microsoft 70-506, et trouver un meilleur travail plus tard. Les documentations offertes par Pass4Test sont tout étudiés par les experts de Pass4Test en profitant leurs connaissances et expériences, ces Q&As sont impresionnées par une bonne qualité. Il ne faut que choisir Pass4Test, vous pouvez non seulement passer le test Microsoft 70-506 et même se renforcer vos connaissances professionnelles IT.
Code d'Examen: 70-506
Nom d'Examen: Microsoft (Microsoft Silverlight 4, Development)
Questions et réponses: 153 Q&As
70-506 Démo gratuit à télécharger: http://www.pass4test.fr/70-506.html
NO.1 You are developing a Silverlight 4 application. You define the visual behavior of a custom control in the
ControlTemplate by defining a VisualState object named Selected.
You need to change the visual state of the custom control to the Selected state.
Which code segment or XAML fragment should you use?
A. VisualStateManager.GoToState( this, "Selected", true )
B. <VisualTransition To="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
C. <VisualTransition From="Selected">
<Storyboard>
...
</Storyboard>
</VisualTransition>
D. public static readonly DependencyProperty SelectedProperty =
DependencyProperty.Register("Selected", typeof(VisualState), typeof(MyControl), null)
public VisualState Selected
{
get { return (VisualState)GetValue(SelectedProperty)
}
set { SetValue(SelectedProperty, value)
}
}
Answer: A
Microsoft 70-506 certification 70-506 certification 70-506
NO.2 You are developing a Silverlight 4 application.
The application contains an XAML page that defines the following Grid control.
<Grid Name="gridBody" >
<Grid.RowDefinitions>
<RowDefinition />
<RowDefinition />
</Grid.RowDefinitions>
<TextBlock Text="Employee Info" />
<TextBlock Text="Please enter employee info" Grid.Row="1" Height="20" VerticalAlignment="Top" />
<TextBox x:Name="EmpInfo" Grid.Row="1" Margin="0,25,0,0" TextWrapping="Wrap" />
...
</Grid>
The codebehind file for myPage.xaml contains the following code segment. (Line numbers are included
for reference only.)
01 public myPage()
02 {
03 InitializeComponent()
04
05 UserControl control = new MyCustomControl()
06
07 }
You need to replace the contents of the second row of gridBody with a user control of the
MyCustomControl type.
Which code segment should you insert at line 06?
A. gridBody.Children.Insert(1, control)
B. gridBody.RowDefinitions.Remove(gridBody.RowDefinitions[1])
gridBody.Children.Insert(1, control)
C. gridBody.Children.Clear()
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
D. List<UIElement> remove = gridBody.Children.Where(c => c is FrameworkElement &&
Grid.GetRow((FrameworkElement)c) == 1).ToList()
foreach (UIElement element in remove)
{
gridBody.Children.Remove(element)
}
Grid.SetRow(control, 1)
gridBody.Children.Add(control)
Answer: D
Microsoft 70-506 examen 70-506
NO.3 }
NO.4 private void worker_ProgressChanged(object sender, ProgressChangedEventArgs e)
NO.5 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a new user control in the application. You add the following XAML fragment to the control.
<StackPanel KeyDown="App_KeyDown"
Orientation="Vertical">
<TextBox x:Name="firstName" />
<TextBox x:Name="lastName" />
<TextBox x:Name="address" />
</StackPanel>
You add the following code segment in the codebehind file of the control. (Line numbers are included for
reference only.)
01 private void App_KeyDown(object sender, KeyEventArgs e)
02 {
03
04 }
05
06 private void FirstAndLastNameKeyDown()
07 {
08...
09 }
You need to ensure that the FirstAndLastNameKeyDown method is invoked when a key is pressed while
the focus is on the firstName or lastName TextBox controls. You also need to ensure that the default
behavior of the controls remains unchanged.
Which code segment should you add at line 03?
A. if (((FrameworkElement)sender).Name == "firstName" ||
((FrameworkElement)sender).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = false
B. if (((FrameworkElement)sender).Name == "firstName" ||
((FrameworkElement)sender).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = true
C. if (((FrameworkElement)e.OriginalSource).Name == "firstName" ||
((FrameworkElement)e.OriginalSource).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = false
D. if (((FrameworkElement)e.OriginalSource).Name == "firstName" ||
((FrameworkElement)e.OriginalSource).Name == "lastName")
{
FirstAndLastNameKeyDown()
}
e.Handled = true
Answer: C
Microsoft certification 70-506 70-506 70-506
NO.6 You are developing a Silverlight 4 application.
You have a collection named ColPeople of the List<Person> type. You define the Person class according
to the following code segment.
public class Person
{
public string Name {get
set }
public string Description { get
set
}
public string Gender { get
set
}
public int Age { get
set
}
public int Weight { get
set
}
}
You need to bind ColPeople to a ComboBox so that only the Name property is displayed.
Which XAML fragment should you use?
A. <ComboBox DataContext="{Binding ColPeople}" ItemsSource="{Binding ColPeople}"
DisplayMemberPath="Name" />
B. <ComboBox DataContext="{Binding Person}" ItemsSource="{Binding Person}"
DisplayMemberPath="ColPeople" />
C. <ComboBox DataContext="{Binding ColPeople}" DisplayMemberPath="Name" />
D. <ComboBox DataContext="{Binding Person}" />
Answer: A
Microsoft 70-506 70-506 examen 70-506 70-506
NO.7 }
NO.8 }
NO.9 You have a Silverlight 4 application that uses isolated storage. You create an application that has a 5
MB file that must be saved to isolated storage.
Currently, the application has not allocated enough isolated storage to save the file.
You need to ensure that the application prompts the user to increase the isolated storage allocation. You
also need to ensure that only the minimum amount of space needed to save the 5 MB file is requested.
Which code segment should you use?
A. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(neededSpace))
{
...
}
}
B. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(store.Quota + neededSpace))
{
...
}
}
C. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(
store.AvailableFreeSpace + neededSpace
))
{
...
}
}
D. using (var store = IsolatedStorageFile.GetUserStoreForApplication())
{
var neededSpace = 5242880
if (store.IncreaseQuotaTo(
store.UsedSize + neededSpace
))
{
...
}
}
Answer: D
Microsoft 70-506 examen 70-506 70-506 70-506
NO.10 }
You need to ensure that worker can be properly canceled.
Which code segment should you use to replace line 11?
A. var cancel = (sender as BackgroundWorker).CancellationPending
if(cancel) {
(sender as BackgroundWorker).CancelAsync()
break
}
else {
InvokeLongRunningProcessStep()
}
B. var cancel = (sender as BackgroundWorker).CancellationPending
if(cancel) {
e.Cancel = true
break
}
else {
InvokeLongRunningProcessStep()
}
C. var cancel = e.Cancel
if(cancel) {
(sender as BackgroundWorker).CancelAsync()
break
}
else {
InvokeLongRunningProcessStep()
}
D. var cancel = e.Cancel
if(cancel) {
e.Cancel = true
break
}
else {
InvokeLongRunningProcessStep()
}
Answer: B
certification Microsoft 70-506 examen certification 70-506 70-506
12.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add a BackgroundWorker object named worker to the application. You also add a CheckBox control
named checkBox and a TextBlock control named statusTextBlock.
You add the following code segment. (Line numbers are included for reference only.)
01 public MainPage()
02 {
03 InitializeComponent()
04 worker.WorkerReportsProgress = true
05 worker.DoWork += new DoWorkEventHandler(worker_DoWork)
06 worker.ProgressChanged += new ProgressChangedEventHandler(worker_ProgressChanged)
07 }
08 private void worker_DoWork(object sender, DoWorkEventArgs e)
09 {
10 for (int i = 0
i < 100
i++) {
11 bool isChecked = checkBox.IsChecked.HasValue && checkBox.IsChecked.Value
12 ExecuteLongRunningProcessStep(isChecked)
13 worker.ReportProgress(i)
NO.11 You are developing a Silverlight 4 application.
The application defines the following three event handlers. (Line numbers are included for reference
only.)
01 private void HandleCheck(object sender, RoutedEventArgs e)
02 {
03 MessageBox.Show("Checked")
04 }
05
06 private void HandleUnchecked(object sender, RoutedEventArgs e)
07 {
08 MessageBox.Show("Unchecked")
09 }
10
11 private void HandleThirdState(object sender, RoutedEventArgs e)
12 {
13 MessageBox.Show("Indeterminate")
14 }
You need to allow a check box that can be selected, cleared, or set to Indeterminate. You also need to
ensure that the event handlers are invoked when the user changes the state of the control.
Which XAML fragment should you use?
A. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsChecked="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
B. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsThreeState="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
C. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsHitTestVisible="True" Checked="HandleCheck"
Indeterminate="HandleThirdState" Unchecked="HandleUnchecked" />
D. <CheckBox x:Name="cb2" Content="Three State CheckBox"
IsEnabled="True" Checked="HandleCheck"
Indeterminate="HandleUnchecked" Unchecked="HandleUnchecked" />
Answer: B
Microsoft 70-506 70-506 examen 70-506 70-506 examen
NO.12 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a Windows Communication Foundation (WCF) Data Service. You add a service reference to
the WCF Data Service named NorthwindEntities in the Silverlight application. You also add a
CollectionViewSource object named ordersViewSource in the Silverlight application.
You add the following code segment. (Line numbers are included for reference only.)
01 void getOrders_Click(object sender, RoutedEventArgs e)
02 {
03 var context = new NorthwindEntities()
04
05 var query = from order in context.Orders
06 select order
07
08 }
You need to retrieve the Orders data from the WCF Data Service and bind the data to the
ordersViewSource object.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following code segment at line 04.
var obsCollection = new ObservableCollection<Order>()
B. Add the following code segment at line 04.
var dsOrders = new DataServiceCollection<Order>()
dsOrders.LoadCompleted += new EventHandler<LoadCompletedEventArgs>(
(dsc, args) =>
{
ordersViewSource.Source = dsOrders
})
C. Add the following code segment at line 07.
dsOrders.LoadAsync(query)
D. Add the following code segment at line 07.
dsOrders.Load(query)
E. Add the following code segment at line 07.
query.ToList().ForEach(o => obsCollection.Add(o))
ordersViewSource.Source = obsCollection
Answer: B, C
certification Microsoft 70-506 examen 70-506 examen 70-506 certification 70-506
NO.13 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
The application contains the following XAML fragment.
<TextBlock x:Name="QuoteOfTheDay" />
The application calls a Windows Communication Foundation (WCF) service named MyService that
returns the quote of the day and assigns it to the QuoteOfTheDay TextBlock.
The application contains the following code segment. (Line numbers are included for reference only.)
01 var client = new MyService.MyServiceClient()
02 client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
03 client.GetQuoteOfTheDayAsync()
You need to handle errors that might occur as a result of the service call. You also need to provide a
default value of "Unavailable" when an error occurs.
Which code segment should you replace at lines 02 and 03?
A. QuoteOfTheDay.Text = "Unavailable"
client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
client.GetQuoteOfTheDayAsync()
B. client.GetQuoteOfTheDayCompleted += (s, args) =>
{
if (args.Result != null)
{
QuoteOfTheDay.Text = args.Result
}
else
{
QuoteOfTheDay.Text = "Unavailable"
}
}
client.GetQuoteOfTheDayAsync()
C. client.GetQuoteOfTheDayCompleted += (s, args) => QuoteOfTheDay.Text = args.Result
try
{
client.GetQuoteOfTheDayAsync()
}
catch (Exception ex)
{
// TODO: handle exception
QuoteOfTheDay.Text = "Unavailable"
}
D. client.GetQuoteOfTheDayCompleted += (s, args) =>
{
if (args.Error == null)
{
QuoteOfTheDay.Text = args.Result
}
else
{
// TODO: handle error
QuoteOfTheDay.Text = "Unavailable"
}
}
client.GetQuoteOfTheDayAsync()
Answer: D
Microsoft certification 70-506 70-506 examen 70-506 70-506 70-506
NO.14 You are developing a Silverlight 4 application.
The application defines the following XAML fragment. (Line numbers are included for reference only.)
01 <ComboBox>
02 <ComboBoxItem Content="Item 1" />
03 <ComboBoxItem Content="Item 2" />
04 <ComboBoxItem Content="Item 3" />
05 </ComboBox>
The codebehind file contains the following code segment. (Line numbers are included for reference only.)
06 void PrintText(object sender, SelectionChangedEventArgs args){
07
08 MessageBox.Show( "You selected " + cbi.Content.ToString() + ".")
09 }
You need to ensure that when the user selects an item in a ComboBox control, the content of the item is
displayed.
What should you do?
A. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedItem as ComboBoxItem)
B. Replace the following XAML fragment at line 01.
<ComboBox SelectionChanged="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedIndex as ComboBoxItem)
C. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedItem as ComboBoxItem)
D. Replace the following XAML fragment at line 01.
<ComboBox DropDownClosed="PrintText">
Add the following code segment at line 07.
ComboBoxItem cbi = ((sender as ComboBox).SelectedIndex as ComboBoxItem)
Answer: A
Microsoft certification 70-506 certification 70-506 70-506 70-506
NO.15 statusTextBlock.Text = e.ProgressPercentage + "%"
NO.16 {
NO.17 }
You attempt to run the application. You receive the following error message:
"Invalid crossthread access."
You need to ensure that worker executes successfully.
What should you do?
A. Replace line 11 with the following code segment.
var b = (bool )checkBox.GetValue(CheckBox.IsCheckedProperty)
bool isChecked = b.HasValue && b.Value
B. Replace line 11 with the following code segment.
bool isChecked = false
Dispatcher.BeginInvoke(() =>
{
isChecked = checkBox.IsChecked.HasValue && checkBox.IsChecked.Value
})
C. Replace line 18 with the following code segment.
statusTextBlock.SetValue(TextBlock.TextProperty, e.ProgressPercentage + "%")
D. Replace line 18 with the following code segment.
Dispatcher.BeginInvoke(() =>
{
statusTextBlock.Text = e.ProgressPercentage + "%"
})
Answer: B
Microsoft 70-506 70-506 certification 70-506 70-506 examen
13.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 public class MyControl : Control
02 {
03
04 public string Title
05 {
06 get { return (string)GetValue(TitleProperty)
}
07 set { SetValue(TitleProperty, value)
}
08 }
09 }
You need to create a dependency property named TitleProperty that allows developers to set the Title.
You also need to ensure that the default value of the TitleProperty dependency property is set to Untitled.
Which code segment you add at line 03?
A. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Untitled",
typeof(string),
typeof(MyControl),
null)
B. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Untitled",
typeof(string),
typeof(MyControl),
new PropertyMetadata("Title"))
C. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Title",
typeof(string),
typeof(MyControl),
new PropertyMetadata("Untitled"))
D. public static readonly DependencyProperty TitleProperty =
DependencyProperty.Register("Title",
typeof(string),
typeof(MyControl),
new PropertyMetadata(new PropertyChangedCallback((depObj, args) =>
{
depObj.SetValue(MyControl.TitleProperty, "Untitled")
})))
Answer: C
certification Microsoft 70-506 examen 70-506 70-506 examen 70-506 certification 70-506
14.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You create a control named MyControl in the application. Each instance of the control contains a list of
FrameworkElement objects.
You add the following code segment. (Line numbers are included for reference only.)
01 public class MyControl : Control
02 {
03
04 public List<FrameworkElement> ChildElements
05 {
06 get {
07 return List<FrameworkElement>)GetValue(MyControl.ChildElementsProperty)
08 }
09 }
10
11 public MyControl()
12 {
13
14 }
15 static MyControl()
16 {
17
18 }
19 }
You need to create the ChildElementsProperty dependency property. You also need to initialize the
property by using an empty list of FrameworkElement objects.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. Add the following code segment at line 03.
public static readonly DependencyProperty ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(new List<FrameworkElement>()))
B. Add the following code segment at line 03.
public static readonly DependencyProperty ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(null))
C. Add the following code segment at line 13.
SetValue(MyControl.ChildElementsProperty, new List<FrameworkElement>())
D. Add the following code segment at line 17.
ChildElementsProperty =
DependencyProperty.Register("ChildElements", typeof(List<FrameworkElement>), typeof(MyControl),
new PropertyMetadata(new List<FrameworkElement>()))
Answer: B, C
Microsoft certification 70-506 70-506
15.You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add the following code segment. (Line numbers are included for reference only.)
01 var outerCanvas = new Canvas()
02 var innerCanvas = new Canvas()
03 innerCanvas.Width = 200
04 innerCanvas.Height = 200
05 outerCanvas.Children.Add(innerCanvas)
06
You need to set the distance between the left of the innerCanvas element and the left of the outerCanvas
element to 150 pixels.
Which code segment should you add at line 06?
A. outerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
B. innerCanvas.Margin = new Thickness(0.0, 150.0, 0.0, 0.0)
C. outerCanvas.SetValue(Canvas.LeftProperty, 150.0)
D. innerCanvas.SetValue(Canvas.LeftProperty, 150.0)
Answer: D
Microsoft examen 70-506 70-506 certification 70-506
16.You are developing a Silverlight 4 application. The application contains a Product class that has a
public Boolean property named IsAvailable.
You need to create a value converter that binds data to the Visibility property of a Button control.
Which code segment should you use?
A. public class BoolToVisibilityConverter : IValueConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(parameter)
return result Visibility.Visible : Visibility.Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
B. public class BoolToVisibilityConverter : IValueConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(value)
return result Visibility.Visible : Visibility.Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
C. public class BoolToVisibilityConverter : PropertyPathConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
return this.ConvertTo(value, typeof(Visibility))
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
D. public class BoolToVisibilityConverter
{
public object Convert(object value, Type targetType, object parameter, System.Globalization.CultureInfo
culture)
{
bool result = System.Convert.ToBoolean(value)
return result Visibility. Visible : Visibility. Collapsed
}
public object ConvertBack(object value, Type targetType, object parameter,
System.Globalization.CultureInfo culture)
{
throw new NotImplementedException()
}
}
Answer: B
Microsoft examen 70-506 70-506 examen
17.You are developing a Silverlight 4 application. The application contains a Product class that has a
public string property named Name.
You create a TextBox control by using the following XAML fragment.
<TextBox Text="{Binding Name, ValidatesOnDataErrors=True}" />
You need to ensure that validation errors are reported to the user interface. You also need to ensure that
a validation error will occur when the TextBox control is empty.
Which code segment should you use?
A. public class Product
{
[Required()]
public string Name { get
set
}
}
B. public class Product : IDataErrorInfo
{
public string Name { get
set
}
public string Error { get { return null
} }
public string this[string columnName]
{
get
{
if (columnName == "Name" && string.IsNullOrEmpty(Name))
{
throw new ValidationException("Name should not be empty!")
}
return string.Empty
}
}
}
C. public class Product : IDataErrorInfo
{
public string Name { get
set
}
public string Error { get { return null
} }
public string this[string columnName]
{
get
{
if (columnName == "Name" && string.IsNullOrEmpty(Name))
{
return "Name should not be empty!"
}
return string.Empty
}
}
}
D. public class Product
{
private string _name
public string Name
{
get { return _name
}
set
{
if (string.IsNullOrEmpty(value))
throw new ValidationException("Name should not be empty!")
_name = value
}
}
}
Answer: C
Microsoft 70-506 70-506 70-506
18.You are developing a ticketing application by using Silverlight 4. You have a listbox named lstTickets
that contains a list of the tickets. The page contains a button that allows the user to print the tickets. The
PrintView UserControl binds to the type in lstTickets and is designed to fit a standard sheet of paper.
You add the following code segment to the button event handler. (Line numbers are included for
reference only.)
01 var doc = new PrintDocument()
02 var view = new PrintView()
03 doc.PrintPage += (s, args) =>
04 {
05 var ppc = doc.PrintedPageCount
06 if (ppc < lstTickets.Items.Count)
07 {
08 var data = lstTickets.Items[ppc]
09 view.DataContext = data
10 args.PageVisual = view
11
12
13 }
14 }
15 doc.Print("tickets")
You need to use the Silverlight printing API to print each ticket on its own page. You also need to ensure
that all tickets in the listbox are printed.
Which code segment should you insert at lines 11 and 12?
A. if (args.HasMorePages == false)
return
B. if (args.HasMorePages == true)
return
C. if (doc.PrintedPageCount < this.lstTickets.Items.Count 1)
args.HasMorePages = true
D. if (ppc == this.lstTickets.Items.Count 1)
doc.EndPrint += (o, p) => { return
}
Answer: C
certification Microsoft 70-506 certification 70-506 70-506 70-506 examen
19.You are developing an outofbrowser
application by using Silverlight 4.
The main page of the application contains the following code segment.
public MainPage()
{
InitializeComponent()
NetworkChange.NetworkAddressChanged += (s, e) => CheckNetworkStatusAndRaiseToast()
CheckNetworkStatusAndRaiseToast()
}
You need to ensure that the application will raise a toast notification when network connectivity changes.
Which two actions should you perform in the CheckNetworkStatusAndRaiseToast method? (Each correct
answer presents part of the solution. Choose two.)
A. Verify that App.Current.IsRunningOutOfBrowser is true.
B. Verify that App.Current.IsRunningOutOfBrowser is false.
C. Verify that App.Current.HasElevatedPermissions is true.
D. Verify that App.Current.HasElevatedPermissions is false.
E. Examine NetworkInterface.GetIsNetworkAvailable().
F. Call App.Current.CheckAndDownloadUpdateAsync() in a try/catch block.
Answer: A, E
Microsoft 70-506 70-506
NO.18 You are developing a Silverlight 4 application. You define an Invoice object according to the following
code segment.
public class Invoice
{
public int InvoiceId { get
set
}
public double Amount { get
set
}
public Supplier Supplier { get
set
}
public DateTime InvoiceDate { get
set
}
public DateTime PayDate { get
set
}
public string InvoiceDescription { get
set
}
}
You need to display a list of invoices that have the following properties displayed on each line: InvoiceId,
Amount, and InvoiceDate.
Which XAML fragment should you use?
A. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ListBox>
B. <ListBox x:Name="InvoiceListBox">
<StackPanel Orientation="Horizontal">
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceId}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=Amount}" />
</ListBoxItem>
<ListBoxItem>
<TextBlock Text="{Binding Path=InvoiceDate}" />
</ListBoxItem>
</StackPanel>
</ListBox>
C. <ListBox x:Name="InvoiceListBox">
<ListBox.Items>
<ItemsPanelTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</ItemsPanelTemplate>
</ListBox.Items>
</ListBox>
D. <ListBox x:Name="InvoiceListBox">
<ListBox.ItemTemplate>
<DataTemplate>
<StackPanel Orientation="Horizontal">
<TextBlock Text="{Binding Path=InvoiceId}" />
<TextBlock Text="{Binding Path=Amount}" />
<TextBlock Text="{Binding Path=InvoiceDate}" />
</StackPanel>
</DataTemplate>
</ListBox.ItemTemplate>
</ListBox>
Answer: D
Microsoft examen 70-506 examen 70-506 70-506 70-506
NO.19 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4.
You add a BackgroundWorker object named worker to the application.
You add the following code segment. (Line numbers are included for reference only.)
01 public MainPage()
02 {
03 InitializeComponent()
04 worker.WorkerSupportsCancellation = true
05 worker.DoWork += new DoWorkEventHandler(worker_DoWork)
06 worker.RunWorkerCompleted += new RunWorkerCompletedEventHandler(worker_Completed)
07 }
08 private void worker_DoWork(object sender, DoWorkEventArgs e)
09 {
10 for (int i = 0
i < 100
i++) {
11 InvokeLongRunningProcessStep()
NO.20 You are developing an application by using Silverlight 4 and Microsoft.NET Framework 4. The
application has a TextBox control named txtName.
You need to handle the event when txtName has the focus and the user presses the F2 key.
Which two actions should you perform? (Each correct answer presents part of the solution. Choose two.)
A. txtName.KeyDown += new KeyEventHandler(txtName_KeyDown)
B. txtName.LostFocus += new RoutedEventHandler(txtName_LostFocus)
C. txtName.TextChanged += new TextChangedEventHandler(txtName_TextChanged)
D. void txtName_TextChanged(object sender, TextChangedEventArgs e)
{
if ((Key)e.OriginalSource == Key.F2)
{
//Custom logic
}
}
E. void txtName_KeyDown(object sender, KeyEventArgs e)
{
if (e.Key == Key.F2)
{
//Custom logic
}
}
F. void txtName_LostFocus(object sender, RoutedEventArgs e)
{
if ((Key)e.OriginalSource == Key.F2)
{
//Custom logic
}
}
Answer: A, E
Microsoft examen certification 70-506 70-506
Différentes façons peuvent atteindre le même but, ça dépend laquelle que vous prenez. Beaucoup de gens choisissent le test Microsoft 70-506 pour améliorer la vie et la carrière. Mais tous les gens ont déjà participé le test Microsoft 70-506, ils savent qu'il est difficile à réussir le test. Il y a quelques dépensent le temps et l'argent, mais ratent finalement.
