Finalement, la Q&A IBM 000-608 plus nouvelle est lancé avec tous efforts des experts de Pass4Test. Aujourd'hui, dans l'Industrie de IT, si on veut se renforcer sa place, il faut se preuve la professionnalité aux les autres. Le test IBM 000-608 est une bonne examination des connaissances professionnelles. Avec le passport de la Certification IBM, vous aurez un meilleur salaire et une plus grande space à se développer.
Le guide d'étude sorti de Pass4Test comprend les expériences résumées par nos experts, les matériaux et les Q&As à propos de test Certification IBM 000-608. Notre bonne réputation dans l'industrie IT sera une assurance 100% à réussir le test IBM 000-608. Afin de vous permettre de choisir Pass4Test, vous pouvez télécharger gratuitement le démo de Q&A tout d'abord.
Pass4Test est un site web de vous offrir particulièrement les infos plus chaudes à propos de test Certification IBM 000-608. Pour vous assurer à nous choisir, vous pouvez télécharger les Q&As partielles gratuites. Pass4Test vous promet un succès 100% du test IBM 000-608.
Code d'Examen: 000-608
Nom d'Examen: IBM (IBM WebSphere Process Server V7.0 Deployment )
Questions et réponses: 65 Q&As
000-608 est un test de IBM Certification, donc réussir 000-608 est le premier pas à mettre le pied sur la Certifiction IBM. Ça peut expliquer certiainement pourquoi le test IBM 000-608 devient de plus en plus chaud, et il y a de plus en plus de gens qui veulent participer le test 000-608. Au contraire, il n'y a que pas beaucoup de gens qui pourrait réussir ce test. Dans ce cas, si vous vous réfléchissez étudier avec une bonne Q&A?
Pass4Test est un bon catalyseur du succès pour les professionnels IT. Beaucoup de gens passer le test IBM 000-608 avec l'aide de l'outil formation. Les experts profitent leurs expériences riches et connaissances à faire sortir la Q&A IBM 000-608 plus nouvelle qui comprend les exercices de pratiquer et le test simulation. Vous pouvez passer le test IBM 000-608 plus facilement avec la Q&A de Pass4Test.
Le Certificat de IBM 000-608 peut vous aider à monter un autre degré de votre carrière, même que votre niveau de vie sera amélioré. Avoir un Certificat IBM 000-608, c'est-à-dire avoir une grande fortune. Le Certificat IBM 000-608 peut bien tester des connaissances professionnelles IT. La Q&A IBM 000-608 plus nouvelle vient de sortir qui peut vous aider à faciilter le cours de test préparation. Notre Q&A comprend les meilleurs exercices, test simulation et les réponses.
Pass4Test est aussi un site d'offrir la ressource des connaissances pour le test Certification IT. Selon les Feedbacks venus de gens qui ont untilié les produits de Pass4Test, Pass4Test est un site fiable comme l'outil de se former. Les Q&As offertes par Pass4Test sont bien précises. Les experts de Pass4Test mettent à jour nos documentations de formation de temps de temps.
000-608 Démo gratuit à télécharger: http://www.pass4test.fr/000-608.html
NO.1 A deployment professional is performing a review of the audit and logging practices being used. One of
the items under review is the current level of logging configured for the Human Task Manager. The site
database administrator requires that any changes made which affect the amount and type of data being
stored to the database must be reviewed and approved prior to implementation. Which of the following log
settings would impact the data stored to the database?
A. Audit logging
B. Failed event logging
C. Task history logging
D. Common Event Infrastructure (CEI) logging
Answer: A
IBM examen 000-608 000-608 000-608 examen
NO.2 A clustered WebSphere Process Server (WPS) production environment consists of a remote messaging
cluster with multiple active messaging engines (ME) configured for high throughput. During the testing of
an application which uses MQ JMS export for in-take of messages, the integration developer has found
out that the messages were arriving on the backend EIS application at random order which was not
desirable. This was not the observed behavior when the application was tested in the Universal Test
Environment (UTE) within WebSphere Integration Developer (WID).
Source Application --------> MQ JMS Export ----------> EIS Application
What is the combination of actions to reconfigure the resources in the production environment in order to
achieve the expected behavior?
A. 1, 2
B. 1, 3
C. 1, 4
D. 2, 3
Answer: A
IBM 000-608 examen 000-608 examen 000-608 000-608
NO.3 In a company all the applications deployed in a WebSphere Process Server network deployment
environment extensively leverage asynchronous messaging with JMS bindings. There is a requirement to
resubmit the messages in case of infrastructure failures or planned shutdown.
What is the suggested message reliability level that could be proposed in this situation.?
A. Assured persistent
B. Reliable persistent
C. Reliable non-persistent
D. Best effort non-persistent
Answer: A
IBM examen 000-608 000-608 certification 000-608
NO.4 An application which uses Business Processes extensively has found that there is an excessive number
of messages being sent to the hold queue. The deployment professional is asked to modify the
configuration of the Business Process Choreographer (BPC) settings for that server in an effort to reduce
the amount of messages in the hold queue. Which value should be changed to improve this situation?
A. Retry limit
B. Process limit
C. Hold queue timeout
D. Retention queue message limit
Answer: A
certification IBM 000-608 certification 000-608 000-608
NO.5 A deployment professional is installing a new business process application. The deployment
professional is using a script installation with the installInteractive option so that they are prompted for
values during the installation process. What is the reason for this installation approach?
A. The interactive configuration script provides an audit log of the installation for revision control
purposes.
B. Installation with the interactive configuration script is faster than using the Integrated Solutions Console
(ISC).
C. Some configuration values must be specified which are not available using the Integrated Solutions
Console (ISC) wizard interface.
D. When configuring with an interactive script, it is not necessary to specify information about the
application required data sources.
Answer: C
certification IBM 000-608 000-608 examen
NO.6 A company has deployed many applications accessing the same backend services. Many of the
applications share the same WSDL and Business Objects. New applications to be deployed in the near
future will use updated backend service definitions. In addition, the memory usage has dramatically
increased over the last deployments and may prevent new application deployments on the same
environment. Which of the following recommendations would a deployment professional MOST likely
provide?
A. The development team must review the applications and provide a single module for the backend
access. Shared WSDL and Business Objects
can be deployed with the new application.
B. The development team should identify common artifacts used by the application. A shared library can
be deployed independently and
referenced by the applications.
C. The environment must be prepared for new applications by increasing the heap size of the servers or
new servers must be added to the
environment to share the workload.
D. The system administrator can deploy new applications including all libraries needed. During the
deployment the libraries of other applications with the needed WSDL and Business Objects can be
referenced as a shared library.
Answer: B
IBM certification 000-608 000-608 000-608
NO.7 WebSphere Process Server (WPS) V7.0 introduces a new Service Component Architecture (SCA)
container. Which of the following changes in the architecture result in improved performance?
A. There is no dependency for an EJB container for WPS V7.0 applications.
B. The new Business Object Runtime Framework replaces the old Business Object framework.
C. Code generation, validation, and packaging is fully covered during the application deployment.
D. Applications for WPS V6.2 and previous releases are automatically migrated to V7.0 during
deployment.
Answer: A
IBM 000-608 examen 000-608 examen
NO.8 A deployment professional is asked to investigate a failure in a business process. However, the specific
process instance being investigated is still running. After close examination, one of the activities of the
process instance is stopped. What action should the deployment professional take to resolve this issue so
that the current process navigation can continue?
A. Change Continue On Error setting of the process template to no but make sure this setting is
overridden at the activity scope to a value of yes.
B. Change Continue On Error setting of the process template to yes and ensure this setting is inherited at
the activity scope.
C. Examine the variables of the stopped activity and update the values as necessary, and save the
settings.
D. Set the expiration for the stopped activity so that after a specified interval the activity terminates and
the process can continue.
Answer: C
certification IBM 000-608 000-608 examen
NO.9 A deployment professional is installing an application which uses business processes in a clustered
WebSphere Process Server environment. The Business Process Choreographer (BPC) container has
previously been configured. During which phase of the installation is the application validated?
A. During the installation phase on the node agent.
B. During the installation phase on the deployment manager.
C. During the configuration phase on the application server.
D. During the application start phase on the application server.
Answer: B
IBM 000-608 000-608 000-608 000-608 examen 000-608
NO.10 A retail company has the requirement to make frequent changes to a long running
MyProcessDiscount business process as newer versions of that process are introduced due to changing
business needs. What approach should a deployment professional adopt to meet this requirement?
A. Stop the older version of the MyProcessDiscount process template from the Integrated
Solutions Console (ISC), install the application containing the newer version of the business process
template.
B. Use the Business Process Choreographer Explorer, select all the running instances with name
MyProcessDiscount business process, then choose the Migrate option to migrate all instances to the
currently valid version of the business
process template.
C. Use the Business Process Choreographer Explorer, if you see any running instances of older version
of MyProcessDiscount process template,
wait till all the instances of that version of the template are completed, then remove the older version of
the business process template and install the newer version of the business process template.
D. Install the application containing the newer version of MyProcessDiscount process template, then
using the Business Process Choreographer Explorer, monitor the state of the running process instances
and, when execution is in the appropriate place in the flow of the business process, select the business
process instances based on the older template only to migrate to the newer version.
Answer: D
certification IBM 000-608 000-608 000-608 examen
Pass4Test est un seul site de provider le guide d'étude IBM 000-608 de qualité. Peut-être que vous voyiez aussi les Q&A IBM 000-608 dans autres sites, mais vous allez découvrir laquelle est plus complète. En fait, Pass4Test est aussi une resource de Q&A pour les autres site web.
没有评论:
发表评论