Meilleur Network Appliance NS0-153 test formation guide

Pass4Test a une grande équipe composée des experts d'expérience dans l'industrie IT. Leurs connaissances professionnelles et les recherches font une bonne Q&A, qui vous permet à passer le test Network Appliance NS0-153. Dans Pass4Test, vous pouvez trouver une façon plus convenable à se former. Les resources de Pass4Test sont bien fiable. Choisissez Pass4Test, choisissez un raccourci à réussir le test Network Appliance NS0-153.

Le test Certification Network Appliance NS0-153 est une chance précieuse à augmenter vos connaissances de technologie informatique dans l'industrie IT. Il attire beaucoup de professionls à participer ce test. Pass4Test peut vous offrir les outils de formation particuliers à propos de test Network Appliance NS0-153. Vous réaliserez plus tôt votre rêve avec la Q&A écrite par l'équipe professionnelle de Pass4Test. Pass4Test se contribue à vous donner un coup de main pour réussir le test Network Appliance NS0-153.

La solution offerte par Pass4Test comprenant un test simulation bien proche de test réel Network Appliance NS0-153 peut vous assurer à réussir 100% le test Network Appliance NS0-153. D'ailleur, le service de la mise à jour gratuite est aussi pour vous. Maintenant, vous pouvez télécharger le démo gratuit pour prendre un essai.

On peut voir que beaucoup de candidats ratent le test Network Appliance NS0-153 quand même avec l'effort et beaucoup de temps dépensés. Cest une bonne preuve que le test Network Appliance NS0-153 est difficile à réussir. Pass4Test offre le guide d'étude bien fiable. Sauf le test Network Appliance NS0-153, Pass4Test peut offrir les Q&As des autres test Certification IT.

Code d'Examen: NS0-153
Nom d'Examen: Network Appliance (Network Appliance Storege Networking)
Questions et réponses: 184 Q&As

NS0-153 Démo gratuit à télécharger: http://www.pass4test.fr/NS0-153.html

NO.1 Which command would you use to verify that the iSCSI service is running?
A.license add iSCSI
B.iscsi service
C.iscsi status
D.iscsi protocol
Correct:C

Network Appliance   certification NS0-153   NS0-153

NO.2 Using the output below, a co-worker determined that these are type "Solaris" LUNs. What would
your determination be? lun show -m LUN pathMapped to LUN ID
--------------------------------------------------- /vol/vol1/lun0 solaris-igroup0 0 /vol/vol1/lun1 solaris-igroup1
0 /vol/vol1/qtree1/lun2 solaris-igroup2 0 /vol/vol1/qtree1/lun3 solaris-igroup3 0
A.These are type "Solaris" LUNs.
B.These are NFS LUNs, but the exact OS cannot be determined.
C.Not enough information is given here. Run the lun show -v command to get the information requested.
D.Not enough information is given here. Run the lun map command to get the information requested.
Correct:C

Network Appliance   certification NS0-153   NS0-153

NO.3 If you believe you have a FC SAN performance problem, which NetApp utility or command
would gather both your Solaris host and storage appliance data for analysis?
A.poststat
B.perfstat
C.prestat
D.sio_ntap.exe
Correct:B

Network Appliance   certification NS0-153   NS0-153

NO.4 To export volumes and directories automatically on reboot, include them in the /etc/exports file.
A.True
B.False
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.5 What is the outcome of this command? lun create -b /vol/vol2/.snapshot/testsnap/lun0
/vol/vol2/lun0.clone
A.It creates a duplicate of the clone process of lun0.
B.It creates a clone of the writeable snapshot of lun0.
C.It creates a writeable snapshot of lun0.
D.It creates a snapshot "testsnap" of vol2.
Correct:C

Network Appliance   certification NS0-153   NS0-153

NO.6 Which one of the following will enable "symlink_strict_security"?
A.options cifs.symlink_strict_security on
B.cifs shares -change -symlink_strict_security
C.options symlink_strict_security=true
D.options symlink_strict_security=on
Correct:B

Network Appliance   certification NS0-153   NS0-153

NO.7 Which security method encrypts the data?
A.IPSec
B.CHAP
C.LUN masking
D.Header and Data Digests
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.8 The writeable snapshot that is created for a LUN clone depends on ___________.
A.mirroring.
B.the snapshot taken at the time the clone was created.
C.exclusive access to the volume.
D.the data in the original LUN not changing.
Correct:B

Network Appliance   certification NS0-153   NS0-153

NO.9 To configure a storage system as a member of an active directory, the time on the storage
system must be synchronized with the time on the Domain Controller.
A.True
B.False
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.10 Which command is the most appropriate for troubleshooting a multiprotocol authentication
problem?
A.wcc
B.rdfile /etc/rc
C.priv set advanced
D.sysstat 1
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.11 Which three are used for creating LUNs on the storage appliance? (Choose 3)
A.lun create
B.lun setup
C.FilerView
D.lun config
Correct:A B C

Network Appliance   certification NS0-153   NS0-153

NO.12 ____________ is the default cfmode for new installations of Data ONTAP 7.2.
A.single image
B.mixed
C.partner
D.dual fabric
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.13 A quota target can be defined as _______________.
A.the maximum amount of disk space in a volume.
B.the maximum number of files in a disk.
C.a user, group, or qtree to which a quota is applied.
D.a specific disk space threshold.
Correct:C

Network Appliance   certification NS0-153   NS0-153

NO.14 UNIX allow file access based on __________.
A.GID or UID and UNIX permissions.
B.NT ACLs and UNIX permissions.
C.NT ACLs and SID.
D.GID or UID and ACLs.
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.15 Applications, such as databases, running on NAS or iSCSI or FC SAN must be
__________________.
A.prepared for snapshots by flushing buffers to disk and momentarily suspending activity.
B.disconnected from their storage resources during the snapshot.
C.using dynamic multipathing during a backup.
D.mirrored with a host-based volume manager to be backed-up.
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.16 If you change the setting for the option cifs.neg_buf_size, you need to terminate CIFS on the
storage appliance and do a restart for the changes to take effect.
A.True
B.False
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.17 If the client is a CIFS client, locks are __________.
A.advisory
B.mandatory
C.ordered
D.optional
Correct:B

Network Appliance   certification NS0-153   NS0-153

NO.18 Three methods of creating a LUN are: *lun setup *lun map *FilerView
A.True
B.False
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.19 To view per client NFS statistics on the storage appliance, options nfs.per_client_stats.enable
must be turned on.
A.True
B.False
Correct:A

Network Appliance   certification NS0-153   NS0-153

NO.20 What is the definition of the cifs setup command?
A.It displays the mount point of all shared directories.
B.It displays the names of all mounted directories on the storage system.
C.It displays the prompts for CIFS configuration information.
D.It displays a list of the users on the storage system.
Correct:C

Network Appliance   certification NS0-153   NS0-153

Il y a beaucoup de gans ambitieux dansn l'Industrie IT. Pour monter à une autre hauteur dans la carrière, et être plus proche du pic de l'Industrie IT. On peut choisir le test Network Appliance NS0-153 à se preuver. Mais le taux du succès et bien bas. Participer le test Network Appliance NS0-153 est un choix intelligent. Dans l'Industrie IT de plus en plus intense, on doit trouver une façon à s'améliorer. Vous pouvez chercher plusieurs façons à vous aider pour réussir le test.