Les produits de Pass4Test sont préparés pour le test Certification Novell 050-710, y compris les formations et les informations ciblées au test Novell 050-710. D'ailleurs, la Q&A de Pass4Test qui est impressionnée par la grande couverture des questions et la haute précision des réponses vous permet à réussir le test avec une haute note.
Vous pouvez télécharger tout d'abord une partie de Q&A Certification Novell 050-710 pour tester si Pass4Test est vraiment professionnel. Nous pouvons vous aider à réussir 100% le test Novell 050-710. Si malheureusement, vous ratez le test, votre argent sera 100% rendu.
Code d'Examen: 050-710
Nom d'Examen: Novell (Novell Certified Linux Administrator)
Questions et réponses: 134 Q&As
Les spécialistes d'expérience de Pass4Test ont fait une formation ciblée au test Novell 050-710. Cet outil de formation est convenable pour les candidats de test Novell 050-710. Pass4Test n'offre que les produits de qualité. Vous aurez une meilleure préparation à passer le test avec l'aide de Pass4Test.
Dans cette société bien intense, c'est avantage si quelque'un a une technique particulère, donc c'est pourquoi beaucoup de gens ont envie de dépnenser les efforts et le temps à préparer le test Novell 050-710, mais ils ne peuvaient pas réussir finalement. C'est juste parce que ils ont pas bien choisi une bonne formation. L'outil de formation lancé par les experts de Pass4Test vous permet à passer le test Novell 050-710 coûtant un peu d'argent.
L'équipe de Pass4Test rehcerche la Q&A de test certification Novell 050-710 en visant le test Novell 050-710. Cet outil de formation peut vous aider à se préparer bien dans une courte terme. Vous vous renforcerez les connaissances de base et même prendrez tous essences de test Certification. Pass4Test vous assure à réussir le test Novell 050-710 sans aucune doute.
050-710 Démo gratuit à télécharger: http://www.pass4test.fr/050-710.html
NO.1 Which command can you use to create a Reiser file system on the sda6 partition? (Choose 2.)
A. mkreiserfs /dev/sda6
B. fdisk.reiserfs /dev/sda6
C. makE. reiserfs /dev/sda6
D. fdisk -t reiserfs /dev/sda6
E. mkfs -t reiserfs /dev/sda6
Answer: AE
certification Novell certification 050-710 050-710 050-710 examen
NO.2 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cachE.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C
certification Novell 050-710 examen 050-710 examen 050-710
NO.3 Which is the main configuration file for logrotate?
A. /etc/logrotate
B. /etc/logr.conf
C. /etc/cron/logrotate
D. /etc/logrotatE. conf
Answer: D
certification Novell 050-710 examen 050-710 examen
NO.4 Why are the noauto and users options used with /etc/fstab?
A. A normal user is not allowed to access this partition.
B. They allow any user to mount and unmount a partition.
C. They specify the partitions that are bootable by a user.
D. They specify the partitions that are not bootable by a user.
Answer: B
Novell certification 050-710 certification 050-710 050-710 050-710 examen
NO.5 As system administrator root, you use the lpoptions command to change printer options, such as the
page sizE. To which file are these options saved?
A. ~/.bashrc
B. ~/.lpoptions
C. /etc/cups/lpoptions
D. /etc/sysconfig/cups
Answer: C
Novell certification 050-710 050-710 certification 050-710 050-710
NO.6 You would like to run command1 and then command2, whether or not command1 completed
successfully. Which command accomplishes this task?
A. command1 | command2
B. command1 ; command2
C. command1 > command2
D. command1 & command2
Answer: B
Novell 050-710 050-710 examen
NO.7 Which statements about partitions are correct? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition tablE.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
rangE.
Answer: ABC
certification Novell 050-710 050-710
NO.8 Which statements about the LVM components are correct? (Choose 2.)
A. A volume group is part of a logical volumE.
B. Logical volumes are grouped in a master group.
C. A volume group always consists of one physical volumE.
D. A physical volume can be a partition or an entire hard disk.
E. A volume group can be reduced in size by removing physical volumes.
F. The operating system accesses the volume groups like conventional physical partitions.
Answer: DE
Novell 050-710 050-710 examen certification 050-710 certification 050-710
NO.9 What is the minimum number of partitions required by a SLES 10 system?
A. None
B. 1
C. 2
D. 4
Answer: C
Novell certification 050-710 050-710 050-710
NO.10 What is the correct order of steps to change the partition table using fdisk?
A. You can't use fdisk to change a partition tablE.
B. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Reboot.
C. Start fdisk > Change the partition table > Write the partition table to hard disk > Exit fdisk > Load the
partition table from the boot prompt.
D. Start fdisk > Change the partition table > Write the partition table to floppy disk or USB stick > Exit
fdisk > Boot from floppy disk or USB stick.
Answer: B
certification Novell certification 050-710 050-710
NO.11 How large is an inode?
A. 256 bits
B. 64 Kbytes
C. 128 bytes
D. 1 Mbyte
Answer: C
Novell examen certification 050-710 certification 050-710 050-710 examen 050-710 050-710
NO.12 Which command can you use to check an ext2/ext3 file system for a correct superblock, faulty data
blocks, or faulty allocation of data blocks?
A. df
B. du
C. fdisk
D. e2fsck
E. reiserfsck
Answer: D
Novell 050-710 050-710 certification 050-710
NO.13 Which command is used to enter or change the quota for user tux?
A. quotacheck
B. repquota tux
C. edquota -u tux
D. edquota -g tux
E. /sbin/quotaon tux
Answer: C
Novell 050-710 050-710 050-710
NO.14 Which command can be used to view the inode assigned to a filename?
A. ls -i
B. fsck -h -i
C. inode --list
D. cat /proc/inodes
Answer: A
Novell examen 050-710 050-710 certification 050-710
NO.15 Waht is the correct syntax for mounting the second partition of the first SCSI hard disk?
A. mount /mnt /dev/hda2
B. mount /dev/hda2 /mnt
C. mount /dev/sdb1 /mnt
D. mount /mnt /dev/sdb1
E. mount /dev/sda2 /mnt
F. mount /mnt /dev/sda2
Answer: E
certification Novell 050-710 examen 050-710 certification 050-710
NO.16 You want to view the last 20 lines of the /var/log/messages file and any new lines that are subsequently
added by syslog to this filE. Which command would you use?
A. tail -20f /var/log/messages
B. end -20f /var/log/messages
C. less -20f /var/log/messages
D. follow -20 /var/log/messages
Answer: A
Novell 050-710 050-710 050-710 050-710
NO.17 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: AEGH
Novell 050-710 examen certification 050-710 050-710
NO.18 In which file is the host name of a Linux computer configured? (Hint: You do not need to include the
entire patH. )
Answer:______
Answer:
NO.19 What information do you need to set up an LDAP client? (Choose 4.)
A. LDAP version
B. LDAP base DN
C. Kind of encryption
D. Synchronization frequency
E. Address of the LDAP server
F. File name of the LDAP database
Answer: ABCE
Novell 050-710 050-710 050-710
NO.20 Which are journaling file systems? (Choose 3.)
A. XFS
B. ext2
C. ext3
D. VFAT
E. minix
F. VFAT32
G. ReiserFS
Answer: ACG
Novell 050-710 examen certification 050-710 certification 050-710 certification 050-710
Pass4Test est un fournisseur important de résume du test Certification IT dans tous les fournissurs. Les experts de Pass4Test travaillent sans arrêt juste pour augmenter la qualité de l'outil formation et vous aider à économiser le temps et l'argent. D'ailleur, le servie en ligne après vendre est toujours disponible pour vous.
没有评论:
发表评论