Les spécialiste profitant leurs expériences et connaissances font sortir les documentations particulière ciblées au test SASInstitute A00-201 pour répondre une grande demande des candidats. Maintenant, la Q&A plus nouvelle, la version plus proche de test SASInstitute A00-201 réel est lancée. C'est possible à réussir 100% avec le produit de SASInstitute A00-201. Si malheureusement, vous ne passez pas le test, votre argent sera tout rendu. Vous pouvez télécharger le démo gratuit en Internet pour examiner la qualité de Q&A. N'hésitez plus d'ajouter le produit au panier, Pass4Test peut vous aider à réussir le rêve.
Dépenser assez de temps et d'argent pour réussir le test SASInstitute A00-201 ne peut pas vous assurer à passer le test SASInstitute A00-201 sans aucune doute. Choisissez le Pass4Test, moins d'argent coûtés mais plus sûr pour le succès de test. Dans cette société, le temps est tellement précieux que vous devez choisir un bon site à vous aider. Choisir le Pass4Test symbole le succès dans le future.
Vous aurez le service de la mise à jour gratuite pendant un an une fois que vous achetez le produit de Pass4Test. Vous pouvez recevoir les notes immédiatement à propos de aucun changement dans le test ou la nouvelle Q&A sortie. Pass4Test permet tous les clients à réussir le test SASInstitute A00-201 à la première fois.
Pass4Test vous promet de vous aider à passer le test SASInstitute A00-201, vous pouvez télécharger maintenant les Q&As partielles de test SASInstitute A00-201 en ligne. Il y a encore la mise à jour gratuite pendant un an pour vous. Si vous malheureusement rater le test, votre argent sera 100% rendu.
Code d'Examen: A00-201
Nom d'Examen: SASInstitute (SAS base programming exam)
Questions et réponses: 140 Q&As
Le test SASInstitute A00-201 est populaire dans l'Industrie IT. Il y a beaucoup de professionnels IT veulent ce passport de IT. Votre vie et salaire sera améliorée avec ce Certificat. Vous aurez une meilleure assurance.
A00-201 Démo gratuit à télécharger: http://www.pass4test.fr/A00-201.html
NO.1 The following SAS program is submitted:
data work.flights;
destination = 'CPH';
select(destination);
when('LHR') city = 'London';
when('CPH') city = 'Copenhagen';
otherwise;
end;
run;
Which one of the following is the value of the CITY variable?
A. London
B. Copenh
C. Copenhagen
D. ' ' (missing character value)
Answer: B
certification SASInstitute A00-201 examen certification A00-201
NO.2 A raw data record is listed below:
----|----10---|----20---|----30
Printing 750
The following SAS program is submitted:
data bonus;
infile 'file-specification';
input dept $ 1 - 11 number 13 - 15;
<insert code here>
run;
Which one of the following SAS statements completes the program and results in a value of 'Printing750'
for the DEPARTMENT variable?
A. department = trim(dept) || number;
B. department = dept || input(number,3.);
C. department = trim(dept) || put(number,3.);
D. department = input(dept,11.) || input(number,3.);
Answer: C
SASInstitute A00-201 A00-201
NO.3 The contents of two SAS data sets named EMPLOYEE and SALARY are listed below:
The following SAS program is submitted:
data work.empsalary;
merge work.employee (in = inemp)
work.salary (in = insal);
by name;
if inemp and insal;
run;
How many observations will the data set WORK.EMPSALARY contain?
A. 2
B. 4
C. 5
D. 6
Answer: B
SASInstitute A00-201 examen A00-201 certification A00-201 A00-201
NO.4 The following SAS program is submitted and reads 100 records from a raw data file:
data work.total;
infile 'file-specification' end = eof;
input name $ salary;
totsal + salary;
<insert IF statement here>
run;
Which one of the following IF statements writes the last observation to the output data set?
A. if end = 0;
B. if eof = 0;
C. if end = 1;
D. if eof = 1;
Answer: D
SASInstitute A00-201 examen certification A00-201 A00-201 examen
NO.5 The following SAS program is submitted:
proc means data = sasuser.houses std mean max;
var sqfeet; run;
Which one of the following is needed to display the standard deviation with only two decimal places?
A. Add the option MAXDEC = 2 to the MEANS procedure statement.
B. Add the statement MAXDEC = 7.2; in the MEANS procedure step.
C. Add the statement FORMAT STD 7.2; in the MEANS procedure step.
D. Add the option FORMAT = 7.2 option to the MEANS procedure statement.
Answer: A
SASInstitute certification A00-201 A00-201 A00-201 examen
NO.6 The following SAS program is submitted:
libname sasdata 'SAS-data-library';
data test;
set sasdata.chemists;
if jobcode = 'chem3'
then description = 'Senior Chemist';
else description = 'Unknown';
run;
A value for the variable JOBCODE is listed below:
JOBCODE
CHEM3
Which one of the following values does the variable DESCRIPTION contain?
A. chem3
B. Unknown
C. Senior Chemist
D. ' ' (missing character value)
Answer: B
certification SASInstitute certification A00-201 certification A00-201 A00-201
NO.7 The following SAS SORT procedure step generates an output data set:
proc sort data = sasuser.houses out = report;
by style;
run;
In which library is the output data set stored?
A. WORK
B. REPORT
C. HOUSES
D. SASUSER
Answer: A
SASInstitute certification A00-201 certification A00-201 certification A00-201
NO.8 The contents of the raw data file FURNITURE are listed below:
----|----10---|----20---|----30
chair,,table
chair,couch,table
The following SAS program is submitted:
data stock;
infile 'furniture' dsd;
input item1 $ item2 $ item3 $;
run;
Which one of the following is the value of the variable named ITEM2 in the first observation of the output
data set?
A. table
B. ,table
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: D
SASInstitute certification A00-201 A00-201 certification A00-201 A00-201
NO.9 The following SAS program is submitted:
data work.month;
date = put('13mar2000'd,ddmmyy10.);
run;
Which one of the following represents the type and length of the variable DATE in the output data set?
A. numeric, 8 bytes
B. numeric, 10 bytes
C. character, 8 bytes
D. character, 10 bytes
Answer: D
SASInstitute examen A00-201 A00-201
NO.10 Which one of the following statements is true regarding the name of a SAS array?
A. It is saved with the data set.
B. It can be used in procedures.
C. It exists only for the duration of the DATA step.
D. It can be the same as the name of a variable in the data set.
Answer: C
SASInstitute A00-201 examen certification A00-201
NO.11 A raw data record is shown below:
07.an2002
Which one of the following informats would read this value and store it as a SAS date value?
A. date9.
B. ddmonyy9.
C. ddMMMyy9.
D. ddmmmyyyy9.
Answer: A
SASInstitute A00-201 certification A00-201 A00-201 examen
NO.12 Which one of the following is true when SAS encounters a data error in a DATA step?
A. The DATA step stops executing at the point of the error, and no SAS data set is created.
B. A note is written to the SAS log explaining the error, and the DATA step continues to execute.
C. A note appears in the SAS log that the incorrect data record was saved to a separate SAS file for
further examination.
D. The DATA step stops executing at the point of the error, and the resulting DATA set contains
observations up to that point.
Answer: B
SASInstitute A00-201 A00-201 examen
NO.13 The following SAS program is submitted:
data work.retail;
cost = '20000';
total = .10 * cost;
run;
Which one of the following is the value of the variable TOTAL in the output data set?
A. 2000
B. '2000'
C. . (missing numeric value)
D. ' ' (missing character value)
Answer: A
SASInstitute A00-201 A00-201 A00-201 A00-201
NO.14 The following SAS program is submitted:
data work.total;
set work.salary(keep = department wagerate);
by department;
if first.department then payroll = 0;
payroll + wagerate;
if last.department;
run;
The SAS data set WORK.SALARY, currently ordered by DEPARTMENT, contains 100 observations for
each of 5 departments.
Which one of the following represents how many observations the WORK.TOTAL data set contains?
A. 5
B. 20
C. 100
D. 500
Answer: A
SASInstitute examen A00-201 certification A00-201
NO.15 The following SAS DATA step is submitted:
libname temp 'SAS-data-library';
data temp.report;
set sasuser.houses;
newvar = price * 1.04;
run;
Which one of the following statements is true regarding the program above?
A. The program is reading from a temporary data set and writing to a temporary data set.
B. The program is reading from a temporary data set and writing to a permanent data set.
C. The program is reading from a permanent data set and writing to a temporary data set.
D. The program is reading from a permanent data set and writing to a permanent data set.
Answer: D
SASInstitute examen certification A00-201 A00-201 certification A00-201
NO.16 Click the Exhibit button to view a listing of the SASUSER.HOUSES data set.
The following SAS program is submitted:
proc report data = sasuser.houses nowd headline;
column style price;
where price lt 100000;
<insert DEFINE statement here>
define price / mean width = 9;
title;
run;
The following ouput is created by the REPORT procedure:
Which one of the following DEFINE statements completes the above program and produces the above
output?
A. define style / order width = 9;
B. define style / group width = 9;
C. define style / across width = 9;
D. define style / display width = 9;
Answer: B
certification SASInstitute A00-201 A00-201 examen certification A00-201 A00-201
NO.17 The SAS data set named WORK.TEST is listed below:
Which one of the following SAS programs created this data set?
A. data work.test;
capacity = 150;
if 100 le capacity le 200 then
airplanetype = 'Large' and staff = 10;
else airplanetype = 'Small' and staff = 5;
run;
B. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
end;
else
do;
airplanetype = 'Small';
staff = 5;
end;
run;
C. data work.test;
capacity = 150;
if 100 le capacity le 200 then
do;
airplanetype = 'Large';
staff = 10;
else
do;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
end;
run;
D. data work.test;D.data work.test;
capacity = 150;
if 100 le capacity le 200 then;
airplanetype = 'Small'; airplanetype = 'Small';
staff = 5;
else;
airplanetype = 'Large'; airplanetype = 'Large';
staff = 10;
run;
Answer: B
SASInstitute A00-201 A00-201 certification A00-201 A00-201
NO.18 The contents of the raw data file CALENDAR are listed below:
----|----10---|----20---|----30
01012000
The following SAS program is submitted:
data test;
infile 'calendar';
input @1 date mmddyy10.;
if date = '01012000'd then event = 'January 1st';
run;
Which one of the following is the value of the EVENT variable?
A. 01012000
B. January 1st
C. . (missing numeric value)
D. The value can not be determined as the program fails to execute due to errors.
Answer: D
certification SASInstitute A00-201 examen A00-201
NO.19 The following SAS program is submitted:
data work.staff;
JobCategory = 'FA';
JobLevel = '1';
JobCategory = JobCategory || JobLevel;
run;
Which one of the following is the value of the variable JOBCATEGORY in the output data set?
A. FA
B. FA1
C. FA 1
D. ' ' (missing character value)
Answer: A
SASInstitute certification A00-201 A00-201 A00-201 A00-201 A00-201
NO.20 The following SAS program is submitted:
libname rawdata1 'location of SAS data library';
filename rawdata2 'location of raw data file';
data work.testdata;
infile <insert item here>;
input sales1 sales2;
run;
Which one of the following is needed to complete the program correctly?
A. rawdata1
B. rawdata2
C. 'rawdata1'
D. 'rawdata2'
Answer: B
SASInstitute A00-201 examen A00-201 examen
Si vous voulez ne se soucier plus à passer le test SASInstitute A00-201, donc vous devez prendre la Q&A de Pass4Test comme le guide d'étude pendant la préparation de test SASInstitute A00-201. C'est une bonne affaire parce que un petit invertissement peut vous rendre beaucoup. Utiliser la Q&A SASInstitute A00-201 offerte par Pass4Test peut vous assurer à réussir le test 100%. Pass4Test a toujours une bonne réputation dans l'Industrie IT.
没有评论:
发表评论