Novell 050-720, de formation et d'essai

But que Pass4Test n'offre que les produits de qualité est pour vous aider à réussir le test Novell 050-720 100%. Le test simulation offert par Pass4Test est bien proche de test réel. Si vous ne pouvez pas passer le test Novell 050-720, votre argent sera tout rendu.

On peut télécharger quelques parties de Q&A gratuites dans le site Pass4Test à propos de test Certification Novell 050-720. Vous pouvez tester notre fiabilité via le démo. Choisir Pass4Test, c'est-à-dire que vous êtes proche d'un pic ensuite de l'Industrie IT.

Vous pouvez trouver un meilleur boulot dans l'industrie IT à travers d'obtenir le test Novell 050-720, la voie à la réussite de votre professionnel sera ouverte pour vous.

Aujourd'hui, il y a pleine de professionnels IT dans cette société. Ces professionnels sont bien populaires mais ils ont à être en face d'une grande compétition. Donc beaucoup de professionnels IT se prouver par les tests de Certification très difficile à réussir. Pass4Test est voilà pour offrir un raccourci au succès de test Certification.

Quand vous hésitez même à choisir Pass4Test, le démo gratuit dans le site Pass4Test est disponible pour vous à essayer avant d'acheter. Nos démos vous feront confiant à choisir Pass4Test. Pass4Test est votre meilleur choix à passer l'examen de Certification Novell 050-720, et aussi une meilleure assurance du succès du test 050-720. Vous choisissez Pass4Test, vous choisissez le succès.

Code d'Examen: 050-720
Nom d'Examen: Novell (Certified Linux Administrator 11)
Questions et réponses: 134 Q&As

050-720 Démo gratuit à télécharger: http://www.pass4test.fr/050-720.html

NO.1 Which command displays information about your hard drive and lets you manage certain hard drive
parameters?
A. siga
B. sitar
C. fdisk
D. lspci
E. iostat
F. hwinfo
G. hdparm
Answer: G

Novell examen   certification 050-720   050-720   050-720

NO.2 How do you create a file called destination containing the same ACLs currently set for the file called
source?
A. getfacl source > destination
B. getfacl -c source destination
C. getfacl source | cp destination
D. getfacl -x source > destination
Answer: A

Novell   050-720   050-720 examen

NO.3 Which statements about partitions are correct.? (Choose 3.)
A. Extended partitions can be subdivided into logical partitions.
B. A primary partition consists of a continuous range of cylinders.
C. Logical partitions do not require entries in the main partition table.
D. If you use only primary partitions, you are limited to eight partitions per disk.
E. SUSE Linux Enterprise Server 10 can only be installed on a primary partition.
F. To install more than one operating system on a partition, the partition has to include the entire cylinder
range.
Answer: A,B,C

Novell   050-720 examen   050-720

NO.4 From the command line, which command would you use to print the document.ps file on the laser
printer?
A. lp -d laser document.ps
B. lpr -p laser document.ps
C. lpq -p laser document.ps
D. print -p laser document.ps
Answer: A

Novell   certification 050-720   certification 050-720

NO.5 You want to find out if files from the wget package were altered since they were installed. Which
command will give you this information?
A. rpm -V wget
B. rpm -v wget
C. rpm -F wget
D. rpm -qf wget
Answer: A

certification Novell   050-720   050-720 examen   050-720 examen   050-720

NO.6 When you connect to an ssh server with your ssh client, the public key of the server is compared to the
keys stored in a file on the client computer. Which file is this?
A. ~/.ssh/id_dsa.pub
B. ~/.ssh/id_rsa.pub
C. ~/.ssh/known_hosts
D. ~/.ssh/authorized_keys
Answer: C

Novell   050-720   certification 050-720

NO.7 You want to copy the master boot record, the partition table, and the 2 magic bytes at the beginning of
/dev/had to a file so you can restore it later. Which command accomplishes this?
A. dd if=/dev/hda of=mbr bs=512 count=1
B. dd if=mbr of=/dev/hda bs=512 count=1
C. dd of=/dev/zero if=/dev/hda bs=512 count=1
D. dd if=/dev/urandom of=/dev/hda bs=512 count=1
Answer: A

Novell   certification 050-720   050-720

NO.8 Which statement about symmetric encryption is correct?
A. The same key is used for encryption and decryption.
B. Symmetric keys are generally longer than asymmetric keys.
C. Asymmetric encryption is generally faster than symmetric encryption.
D. A public key and a private key are needed for symmetric encryption/decryption.
Answer: A

certification Novell   050-720   050-720   certification 050-720   050-720

NO.9 In which file is the name resolution configured?
A. /etc/dns.conf
B. /etc/resolv.conf
C. /etc/HOSTNAME
D. /etc/nameservers
E. /etc/sysconfig/network/dns
Answer: B

certification Novell   050-720   certification 050-720   050-720   050-720   050-720

NO.10 After the partitions are checked and the root file system is mounted, the /sbin/init command is executed.
Which process ID is assigned to /sbin/init?
A. 0
B. 1
C. 3
D. 100
E. 1000
F. Depends
Answer: B

Novell   050-720 examen   050-720   certification 050-720

NO.11 Which file system type supports ACLs without a special mount option?
A. ext2
B. ext3
C. XFS
D. ReiserFS
Answer: C

certification Novell   certification 050-720   050-720   050-720 examen   certification 050-720

NO.12 You want to install the xyz-software-1.2.3-5.i586.rpm package, but only if a previous version is already
installed. Which command will do this?
A. rpm -ivh xyz-software-1.2.3-5.i586.rpm
B. rpm -evh xyz-software-1.2.3-5.i586.rpm
C. rpm -Fvh xyz-software-1.2.3-5.i586.rpm
D. rpm -Uvh xyz-software-1.2.3-5.i586.rpm
Answer: C

Novell examen   050-720   certification 050-720   certification 050-720

NO.13 Which statements about PAM are correct? (Choose 3.)
A. To enable authentication with PAM, you need a smart cart reader.
B. Each line in a PAM configuration file contains 6 columns plus optional arguments.
C. Configuration files of PAM modules can be found in /etc/pam.d/ and /etc/security/.
D. After the PAM configuration has been adjusted for an application, this application can be used by SSH.
E. The /etc/pam.d/other file contains a default configuration if no application-specific file is found in
/etc/pam.d/.
F. PAM creates a software level with defined interfaces between applications and the current
authentication mechanism.
Answer: C,E,F

certification Novell   050-720   050-720   050-720

NO.14 What is the difference between the /dev/st0 and /dev/nst0 devices?
A. /dev/st0 is the first SCSI CD burner; /dev/nst0 refers to the CDROM drive.
B. /dev/st0 is the first tape drive; /dev/nst0 refers to the same tape drive in non-rewinding mode.
C. /dev/st0 is the first serial console; /dev/nst0 refers to the same serial console as a block device.
D. /dev/st0 is the first SCSI hard drive; /dev/nst0 refers to the same SCSI hard drive in read-only mode.
Answer: B

certification Novell   050-720   050-720 examen   certification 050-720

NO.15 The /etc/sysconfig/network/ifcfg-eth-id-macaddress configuration file contains a BOOTPRO option.
Which are possible values of BOOTPROTO?
A. static or dhcp
B. master or slave
C. onboot, ifpluged, or manual
D. ethernet, wireless, or manual
Answer: A

Novell   050-720   050-720   050-720   050-720

NO.16 Which command can you use to set up limits for failed logins?
A. w
B. who
C. last
D. faillog
E. lastlog
Answer: D

Novell   050-720   050-720

NO.17 Which user authentication methods can be used with SLES 10? (Choose 4.)
A. NIS
B. WEP
C. SSH
D. PAM
E. LDAP
F. Handshake
G. Windows Domain
H. Local (/etc/passwd)
Answer: A,E,G,H

certification Novell   050-720   certification 050-720

NO.18 Which commands can be used if you do not find the desired information in a manual page, or find no
manual page at all for a program?
A. sos program
B. info program
C. help program
D. wiki program
Answer: B

certification Novell   certification 050-720   050-720 examen   050-720   050-720 examen   050-720

NO.19 From command mode in vi, what do you have to do to enter text?
A. Press e
B. Press i
C. Press k
D. Press w
Answer: B

certification Novell   certification 050-720   050-720   050-720   050-720

NO.20 Which statement about the /sbin/ldconfig command is correct?
A. The ldconfig command is used to link directories.
B. The ldconfig command is used to configure an LDAP connection.
C. The ldconfig command is used to update the software library cache.
D. The ldconfig command is used to show dynamic libraries needed by a program.
Answer: C

Novell   certification 050-720   050-720   050-720 examen

Les experts de Pass4Test ont fait sortir un nouveau guide d'étude de Certification Novell 050-720, avec ce guide d'étude, réussir ce test a devenu une chose pas difficile. Pass4Test vous permet à réussir 100% le test Novell 050-720 à la première fois. Les questions et réponses vont apparaître dans le test réel. Pass4Test peut vous donner une Q&A plus complète une fois que vous choisissez nous. D'ailleurs, la mise à jour gratuite pendant un an est aussi disponible pour vous.